Installation Instructions

- Prior to installation of this fixture or removal of a previous fixture, disconnect the power by turning off
the circuit breaker or by removing the fuse at the fuse box.
Use bulbs specified by the marking and/or labels on the fixture. Consult a qualified electrician to ensure correct
branch circuit conductor.
- Consult a qualified electrician for installation of this fixture.
- Read all instructions before installing.
There are too many items on
1. Bulb is burnt out.
Bulb will not light.
Fuse blows or the circuit breaker trips
when light is turned on.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
one circuit.
Unplug the other items on the circuit.
WARNING
CAUTION
RISK OF ELECTRIC SHOCK
RISK OF FIRE
This product must be installed in accordance with the applicable installation code by a person familiar with the construction,
operation of the product and hazards involved.
- Turn off the fixture before replacing the bulb(s).
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may
damage the finish.
2. Check power supply.
3. Check wiring.
1. Replace light bulb.
4. Test or replace switch.
PROBLEM
POSSIBLE CAUSE CORRECTIVE ACTION
Please read and understand this entire manual before attempting to assemble operate or install the product.
TROUBLESHOOTING
CARE AND MAINTENANCE
SAFETY INFORMATION
Bulb Replacement: Uses 4*60 W max, ST64 bulb