Installation Instructions

7
ASSEMBLY INSTRUCTIONS
14. Remove the socket rings preassembled to the sockets.
Then, lift the center hole in the glass shade over the
socket and re-install the socket ring inside the glass shade
to secure.
15. Install three E26-base bulbs (not included) into the
sockets. Note: It’s not necessary to use an Edison-shaped
bulb.
16. Restore the power at the main fuse or circuit breaker.
13. Align the mounting bracket screws with the holes
in the canopy. Then, lift the canopy over the mounting
bracket screws and secure with the screw caps.
13
14
15
16
Screw Caps
Canopy
Socket
Glass Shade
E26-base Bulb
(not included)
Socket Ring
Mounting
Bracket Screw