Installation Instructions

ASSEMBLY INSTRUCTIONS
5
8. Weave the wires from the xture up through the chain
links and out of the canopy.
7. Use the two remaining open links to secure the chains
to the chain loops on the canopy.
8
Canopy
Wires
Open Link
Chain
Loop
6. Note: If desired, use pliers (not included) to shorten
both chains to the same desired length. Save the open
links from the ends of the chains.
Use an open link to attach each chain to the xture.
Open Link
7
6
Extension Rod
5
5. Feed the wires through the one extension rod. Then,
turn the extension rods in a clockwise direction to attach
them to the xture.