Installation Instructions

4
ASSEMBLY INSTRUCTIONS
1
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
3. Attach the mounting bracket to the outlet box (not
included) using the two mounting screws from the
hardware kit. Note: Orientation of the mounting bracket
screws will determine the orientation of the xture. Your
mounting bracket screws may need to be inserted into
a dierent slot on the mounting bracket than shown in
image.
4. Loosen the ground screw on the mounting bracket.
Wrap the bare/green (ground) supply wire around the
shaft of the screw and re-tighten the ground screw.
2. Remove the screw caps from the mounting bracket
screws and separate the mounting bracket from the
canopy.
2
Mounting
Bracket
Screw
Mounting Bracket
Screw Cap
Canopy
3
Mounting Screw
Ground Screw
Bare/Green (ground) Wire
Mounting Bracket Screw
Mounting Bracket
4