Installation Instructions
WARNING
READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE BEGINNING TO INSTALL THE
LIGHT FIXTURE AND SAVE INSTRUCTIONS.
This xture is intended for indoor use. Not suitable for damp or outdoor locations.
The net weight of the light xture is approximately: 7.28 lbs.
To avoid risk of electric shock, be sure to shut o power at the main fuse or circuit breaker box before
installing or servicing this xture. Turning o the electrical power by using the light switch is not
sucient to prevent electrical shock.
Installation must comply with the national electrical code, ANSI/NFPA 70-1999 and local codes. If you
are unfamiliar with the methods of installing electrical wiring, seek the services of a qualied licensed
electrician.
To avoid personal injury, the use of gloves or protective clothing may be necessary when handling
xture parts with sharp edges.
To reduce the risk of re, electrical shock or personal injury, do not connect this xture to an outlet box
that is not properly grounded.
To reduce the risk of re, electrical shock, or personal injury, each wire connector used with this light
xture should accept only one 18-gauge wire from the light xture and one 18-gauge wire from the
outlet box.
Wire colors from outlet box may not be the same color used in this manual. When in doubt, consult a
qualied licensed electrician to determine the proper wiring.
SAFETY INSTRUCTIONS
3