Installation Instructions

ManualsBrandsPatriot Lighting ManualsLighting & Ceiling Fans33' 100 Light Multi-Color LED Fairy String Light

Read all instructions before assembly.

Failure to do so may result in faulty assembly and potential injury.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-877-615-1378

Monday – Friday 8:00 a.m. – 4:00 p.m. EST

Sku Number: 346-0655

100-Light Fairy Light (Multi-Color)

Model Number: 20318

PACKAGE CONTENTS

Requires (3) AA 1.5V batteries (not included)

LED: The lifetime for LEDs is estimated to be 100,000 hours.

It should never need to be replaced.

Summary of content (4 pages)

PAGE 1
Sku Number: 346-0655 100-Light Fairy Light (Multi-Color) Model Number: 20318 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-877-615-1378 Monday – Friday 8:00 a.m. – 4:00 p.m. EST PACKAGE CONTENTS Requires (3) AA 1.5V batteries (not included) LED: The lifetime for LEDs is estimated to be 100,000 hours. It should never need to be replaced. Read all instructions before assembly. Failure to do so may result in faulty assembly and potential injury.
PAGE 2
WARNING • Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickelcadmium or other types) batteries. • Replace only with 1.5V “AA” type batteries. Please remove batteries if consumed or if product is to be left unused for a long time or when depleted. • Replace all batteries of a set at the same time and clean the battery contacts and also those of the device prior to the battery installation. • Replace batteries insuring proper polarity.
PAGE 3
BATTERY REPLACEMENT Figure 4 CHANGING THE BATTERY (Figures 4 & 5) • Slide the battery compartment cover to open. ON TIMER OFF • Carefully remove the old batteries. • Insert 3 new AA 1.5V batteries (not included) noting the correct polarity for each. • Re-assemble the unit by reversing the above procedure.
PAGE 4
TROUBLESHOOTING The light does not come on: • Make sure the switch is in the ON or TIMER position. • Check the batteries and make sure that they are in contact with the metal plate and the polarity is correct. If the batteries are worn out, replace with AA 1.5V batteries.