Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting4" 65W Equivalent Dimmable Intergrated LED Ultra-Thin Round Downlight

PACKAGE CONTENTS

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at

1-844-255-9692 Monday – Friday 8:00 a.m. – 5:00 p.m. CST

PART DESCRIPTION QUANTITY

A 4in Round LED Ultra-Thin Downlight 1

B LED Driver + Hardwire Junction Box 1

Patriot Lighting® is a registered trademark

4 in. Round LED

Ultra-Thin Downlight

Sku Numbers: 349-1200

Model Numbers: 0065-0027

Summary of content (4 pages)

PAGE 1
Sku Numbers: 349-1200 4 in. Round LED Ultra-Thin Downlight Model Numbers: 0065-0027 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-844-255-9692 Monday – Friday 8:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A B PART DESCRIPTION QUANTITY A 4in Round LED Ultra-Thin Downlight 1 B LED Driver + Hardwire Junction Box 1 1 Patriot Lighting® is a registered trademark of Menard, Inc. All Rights Reserved.
PAGE 2
SAFETY INFORMATION WARNING: These products may represent a possible shock or fire hazard if improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes, and/or the current National Electric Code (NEC). Disconnect power to the unit prior to installation. WARNING: To reduce risk of fire, electric shock, or injury to persons, • Read all installation instructions before beginning.
PAGE 3
INSTALLATION INSTRUCTIONS WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit power cord or housing to contact any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death from electric shock. 1.
PAGE 4
DIMMING INFORMATION • This product is suitable for use in dimming circuits. For 10-100% light control, use with an LED-compatible dimmer (sold separately). CARE AND MAINTENANCE • Use only a mild soap and/or water with a soft cloth to clean the fixture. Harsh chemicals will damage the fixture. Do not wipe the fixture with a rough cloth that may scratch the finish or the lens. TROUBLESHOOTING • The light does not come on at all: a) With power supply turned off, ensure all connections are made correctly.