Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting2-Pack 5" and 6" 65W Equivalent Warm White Dimmable LED Recessed Retrofit Downlight

PACKAGE CONTENTS

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at

1-800-285-8051 Monday – Friday 8:00 a.m. – 5:00 p.m. CST

PART DESCRIPTION QUANTITY

A LED Retrot 2

B Medium base socket adapter 2

Patriot Lighting® is a registered trademark

5 in./6 in. LED RETROFIT

Sku Numbers: 349-1266 and 349-1267

Model Numbers: 0065-0001 and 0065-0002

Summary of content (4 pages)

PAGE 1
Sku Numbers: 349-1266 and 349-1267 5 in./6 in. LED RETROFIT Model Numbers: 0065-0001 and 0065-0002 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-285-8051 Monday – Friday 8:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A B PART DESCRIPTION QUANTITY A LED Retrofit 2 B Medium base socket adapter 2 1 Patriot Lighting® is a registered trademark of Menard, Inc. All Rights Reserved.
PAGE 2
SAFETY INFORMATION WARNING: These products may represent a possible shock or fire hazard if improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes, and/or the current National Electric Code (NEC). Disconnect power to the unit prior to installation. WARNING: To reduce risk of fire, electric shock, or injury to persons, • Read all installation instructions before beginning.
PAGE 3
INSTALLATION INSTRUCTIONS 1. Remove existing light bulb and trim. Confirm that the existing recessed housing’s inside diameter is within the range of 5-1/8 in. minimum diameter to 6-5/8 in. maximum diameter; and that it has a minimum clearance height of 3-3/4 in. clearance height Fig. 1 inside diameter 2. LED Retrofit Downlights are pre-set for use with 6 in. diameter housings. For housings with an inside diameter greater than 5-1/2 in., go to step 3.
PAGE 4
DIMMING INFORMATION • This product is suitable for use in dimming circuits. For 10-100% light control, use with an LED-compatible dimmer (sold separately). CARE AND MAINTENANCE • Use only a mild soap and/or water with a soft cloth to clean the fixture. Harsh chemicals will damage the fixture. Do not wipe the fixture with a rough cloth that may scratch the finish or the lens.