Installation Instructions

INSTALLATION INSTRUCTIONS

1. Loosen the phillips head screw from center hook

mount area (A)

2. Thread hook (B) into the opening on back of xture

until it is rmly tightened

3. Tighten phillips head screw to secure hook (A)

4. Use an appropriate device to safely hang light.

5. Fully tighten screw (C) to prevent chain or device from

slipping off hook.

6. Connect supply ground to xture ground (green) lead

7. Connect supply neutral to xture neutral (white) lead

8. Connect supply hot to xture hot (black) lead

For 0-10V dimming:

9. Connect dim+ to xture (purple) lead

10. Connect dim- to xture (gray) lead

*Dimming range for this xture is 10-100%

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Chain not included