Installation Instructions
14
16Ft RGB Tape Light Kit
With Remote
Sku Numbers: 346-2533
Model Number: 0040-0147
PACKAGE CONTENTS
Note: Hardware not shown to actual size.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at
1-844-255-9692 Monday – Friday 8:00 a.m. – 5:00 p.m. CST
• Do not use chemical solvents or harsh abrasives to clean lights.
• LEDs are not serviceable. Do not attempt to open or service LEDs.
CARE AND MAINTENANCE
1) Tape Light will not light up.
a) Ensure all connections are correct and have not disconnected.
2) Lights will not respond to remote control.
a) Remote control signal is weak. Replace remote control battery.
b) Remote control is too far from tape light. Use remote control closer to the lights.
c) Plastic safety tab has not been removed from remote. Remove plastic tab from battery drawer.
If unable to x any of the above issues, please consult a certied electrician.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
TROUBLESHOOTING
RV1950
PART DESCRIPTION QUANTITY
A 16.4ft RGB Tape Light Reel 1
B In-Line Infrared Receiver 1
C 12” Linking Cable 1
D 12V Plug-in Power Adapter 1
E Straight Connectors 2
F Mounting Clips 13
G Mounting Screws 26
H Handheld Remote Control 1
I CR2025 Battery 1
Patriot Lighting® is a registered trademark
of Menard, Inc. All Rights Reserved.
A
B
E
F
D
G
I
H
C
If, during normal use, this PATRIOT LIGHTING
®
lighting xture breaks or fails due to a defect in material and workmanship within
one (1) year from the date of original purchase, simply bring this lighting xture with your original sales receipt back to your nearest
MENARDS
®
retail store. At its discretion, PATRIOT LIGHTING
®
agrees to have the product or any defective part(s) repaired or
replaced with the same or similar PATRIOT LIGHTING
®
product free of charge, within the stated warranty period, when returned by
the original purchaser with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs;
(2) does not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to persons/
property or costs. This warranty does give you specic legal rights and you may have other rights, which vary from state to state.
ONE-YEAR LIMITED WARRANTY