Installation Instructions

ASSEMBLY INSTRUCTIONS

STEP 7:

A. Re-attach the ceiling canopy to the crossbar

assembly.

b. Secure with the previously removed Hex Nut.

c. Then, attached the lock ball over the ceiling

canopy.

Crossbar Assembly

lock ball

Hex Nut

STEP 8:

a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.

Your installation is completed now. Restore electricity. Retain this sheet for future reference.

CARE AND MAINTENANCE

TROUBLESHOOTING

1) The light does not come on at all:

2) Fuse blows or circuit trips when light is turned on.

a) Make sure the wall switch and circuit breaker are on.

b) Make sure the wiring is correct.

a) Check for crossed wires, ensure wiring is correct.

If unable to fix any of the above issues, please consult a certified electrician.

• To clean, turn off and wipe with a damp, non-abrasive cloth.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-645-3184,

Monday - , 7:30 a.m. -4:00 p.m., CST .Friday