Installation Instructions

ManualsBrandsPatriot Lighting Elegant Home ManualsIndoor LightingPatriot Lighting® Elegant Home Bastein Black 4-Light Island Light

SKU NUMBER: 351-8326

4-LIGHT ISLAND

MODEL NUMBER: MND4155B

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-645-3184,

Monday - , 7:00 a.m. -4:00 p.m., CST .Friday

PACKAGE CONTENTS

REVISED 2018-04-12

Stock Part#

PART

DESCRIPTION

QUANTITY

Fixture Body

Crossbar Assembly

1pc

3pcs

2pcs

Wire Connector

Outlet Box Screw

Quick Link

4pcs

913765KIT

1pc

Ceiling Canopy

Fixture Chain

2pcs

Fixture Loop

6” Rod

2pcs

6pcs

12” Rod

1pc

N/A

Vintage Bulb

4pcs

M381CHEK

9006EXEK

9012EXEK

Summary of content (6 pages)

PAGE 1
SKU NUMBER: 351-8326 4-LIGHT ISLAND MODEL NUMBER: MND4155B REVISED 2018-04-12 PACKAGE CONTENTS PART DESCRIPTION QUANTITY Stock Part# AA Crossbar Assembly 1 pc BB Wire Connector 3 pcs CC Outlet Box Screw 2 pcs DD Quick Link 4 pcs A Fixture Chain 2 pcs B Ceiling Canopy 1 pc C Fixture Loop 2 pcs D 6” Rod 2 pcs 9006EXEK E 12” Rod 6 pcs 9012EXEK F Fixture Body 1 pc G Vintage Bulb 4 pcs AA C 913765KIT D BB E M381CHEK N/A CC DD A B G N/A F Questions, problems, missing
PAGE 2
HARDWARE CONTENTS Note: Hardware not shown actual size. AA Crossbar x1 BB Wire Connector x3 CC Outlet Box Screw x2 DD Quick Link x4 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING: ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
PAGE 3
ASSEMBLY INSTRUCTIONS STEP 1: AA a. Secure the crossbar (AA) to the outlet box (not included) with outlet box screws. Tighten until snug. Note : The preassembled mounting nipple on the crossbar should protrude outward. Outlet Box Screw Outlet Box STEP 2: a. Remove lock ball and Hex Nut from crossbar assembly (AA). b. Fit ceiling canopy (B) over the nipple on crossbar assembly and secure with lock ball. Note : The ceiling canopy should be snug against the ceiling and the lock ball.
PAGE 4
ASSEMBLY INSTRUCTIONS STEP 5: B chain links a. Pass supply wires and ground wire through the quick link, fixture chain and ceiling canopy. DD 8,9 and 10 ft. Ceilings b. Connect the Fixture Loops (C) to the chain links on the underside of the Ceiling Canopy (B) by using Quick Links (DD). Continue to step 6. A DD C 11 and 12 ft. ceilings c. If mounting to 11 or 12 foot ceiling, attach fixture chain to fixture loop. d. Adjust the Fixture Chain (A) to the desired length, removing links if needed.
PAGE 5
ASSEMBLY INSTRUCTIONS STEP 7: a. Confirm that the mounting height is acceptable. Refer to STEP 3 or STEP5 if changes are required. Note : To make the next step easier, cut the supply wire and ground wire 24 inches longer than the distance from the fixture loop to the ceiling. Important : Please pay attention to the polarity (wires labels L & N) when cutting wires. Wire identification will be needed in STEP 8. b.
PAGE 6
CARE AND MAINTENANCE • To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING 1) The light does not come on at all: a) Make sure the wall switch and circuit breaker are on. b) Make sure the wiring is correct. 2) Fuse blows or circuit trips when light is turned on. a) Check for crossed wires, ensure wiring is correct. If unable to fix any of the above issues, please consult a certified electrician.