Installation Instructions

● To clean, turn off and wipe with a damp, non-abrasive cloth.
1) The light does not come on at all:
a) Make sure the wall switch and circuit breaker are on.
b) Make sure the wiring is correct.
2) Fuse blows or circuit trips when light is turned on.
a) Check for crossed wires, ensure wiring is correct.
If unable to fix any of the above issues, please consult a certified electrician.
CARE AND MAINTENANCE
TROUBLESHOOTING
Page 3 of 4
ASSEMBLY INSTRUCTIONS (continued)
The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326
Turn on the power at fuse or
circuit box.
5. Use the threaded pipe (JJ)
through the decorated cup
(LL) , glass (B), rubber pad
(OO) and washer (KK), then
turn the hex nut (II) to fix them.
5
II
B
JJ
KK
OO
LL
MM
6. Remove the rubber pads and
set screws from the fixture,
then attach the glass (B) to
the fixture , and secure it
with rubber pads (HH) and set
screws (NN).
6
Fixture
NN
HH
B
Spare Parts List:
II JJ
Hex Nut
Washer
KK
Threaded Pipe
Glass
9998CS
LL
Decorated Cup
MM
NN
Finial
OO
Set Screw
X2
AA
BB
DD
EE
FF
GG
CC
Mounting Screw
X2
Green Grounding
Screw X1
Lock Nut
X4
Wire Connector
X3
HH
Rubber Pad
X2
Rubber Pad
Ball Nut
X2
Headless Screw
X2
HH
Rubber Pad
X2
Assembly Kit
5919MM (1 SET)
Assembly Kit
5920AA (1 SET)
Assembly Kit
5918MM (1 SET)
Mounting Plate
X1
B