Instructions / Assembly

TOOLS NEEDED
9/16” and ¾” Wrenches & Ratchet w/Sockets Hammer Phillips Screwdriver or Drill
May Be Required: Knife Drill with 3/8” Bit Flat File ½” (12mm) Socket Pliers
COMPONENT IDENTIFICATION
1. The 4’x 8’ Aluminum Truss Frame, PN 10800 includes the following components:
(2) Side Frames (2) Middle Rails (1) Connector Rail
(Same as End Rail PN 10803)
(2) Center Tubes 8 ft Diagonal Brace (12) 3/8-16 X 1.0 Bolts/Nuts
(1I) Long and (1) Short (6) 3/8-16 X 1.62 Bolts/Nuts
2. The Support Post Assembly, PN 10816 - 10819 includes 1½ Schedule 40 Galvanized Support Pipe available
in 4 ft, 6 ft, 8 ft and 10 ft lengths plus the following components:
(1) Pipe Post Bracket (1) Post Foot Plate (1) Vinyl Cap
PN 10810 PN 10811 PN 10823