Instructions / Assembly

STRAIGHT SECTIONAL DOCKS STRAIGHT ROLL-IN DOCKS ROLL-IN PATIO DOCKS
General Guidelines:
1. Maximum recommended unsupported span for Patriot Aluminum Dock Frames is 16 feet. Always support
outside corners. Use additional posts to add stability as necessary.
2. Always use Patriot Dock Pipe Post Brackets (PN 10810), Post Foot Plates (PN 10811) and 1½ Schedule
40 galvanized pipe (PN 10812-10815) for support posts on Patriot Docks. Installing other parts may result
in an unstable dock or unsafe installation.
3. Always install Vinyl Pipe Caps (PN 10823) on top of support pipes to avoid injury from sharp edges.
4. Never leave the end of the dock unsupported. Always support both corners of the Patio platform. Roll-in
kits should be installed at the very end of the dock for best stability. Additional posts may be required if
roll-in kits are installed at locations other than shown above.
5. Always assemble the dock frame so there is a 4-foot End Rail (PN 10803) at the ends of the dock. For
patio or platform docks, two End Rails are required (may have to be purchased separately). For straight
sectional docks only one End Rail is required. If lateral sections are to be added to the sectional dock (to
form an L-shape), a separate End Rail is not required.
6. When adding lateral frame sections to create an L-shaped configuration (not shown in basic
configurations), install the LAKE end (Connector Rail end) of the added frame towards the straight main
dock. Add two Support Pipes to the end of every lateral section.
7. Install the Pipe Brace Kit PN 10828 in conjunction to the Roll-In Kit for lakes with soft bottoms or deep
water applications. The brace kit will help prevent potential bending of the Support Pipes.
8. Always secure supports posts and level dock before installing deck panels. Remove decking panels
whenever possible when pulling the frame out of the water to prevent bending the dock frame.
9. Maximum recommended distance between wheel kits for long dock applications is 32 feet.
10. Secure poly decking with cable ties as necessary to prevent shifting.
Wear protective gloves. File any sharp edges on pipes and frame to avoid cuts or scrapes.
If you have parts missing, contact your dealer before proceeding. For accessories, replacement parts, FAQ and
warranty information, and detailed assembly directions with hints, please visit www.patriotdocks.com
.