Instruction Manual

*. Power button： Press any button on the remote control to activate
it.
NOTE: The screen will be off after 1 minute without the remote control
operating.
1. Screen: Screen will display icons of static shock, vibration, beep,
Intensity, indication of battery and channel 1/3.
2. Intensity Down Button: Press the button, you can turn down the level of
intensity of static shock, vibration and beep.
3. Intensity Up Button: Press the button, you can turn up the level of
intensity of static shock, vibration and beep.
4. Model Button: Press the button, you can check the current work modes
and its corresponding levels.
5. Static Shock Button: Press the button, the receiver will emit shock.
6. Vibration Button: Press the button, the receiver will emit vibrate.
7. Beep Button: Press the button, the receiver will emit the sound "beeps".
8. Channel 1/3 Button: Press the button, you can select the dog you want to
control between the first dog and the other dogs.
9. USB Charging Port: Insert charging cable into charging port to charge
the remote control.
10. Receiver Power Button: Long Pressing the button, you can turn on or off
the training collar.
11. Conductor: It includes contact point and conductive silicone cover.
Note: Conductive silicone cover also can conductive.
12. USB Charging Port & Rubber Lid: Insert charging cable into charging
port to charge the receiver.
Product Function
2