User Manual

72
4
4.20 Firmware Update Screen
The rmware for this product can be updated.
After the rmware has been updated, this product automatically reboots.
[Setup Method]
1. Click the "reference" button to designate the rmware to rewrite for this product.
2. Clicking the "update" button will start the rmware update.
Fig. 4.20.1 Firmware Update Setup Screen
Fig. 4.20.2 Firmware Update Failure Screen
Please
Fig. 4.20.2 shows the type of screen in case an error occurs during the rmware update.
If an error occurs during the rmware update, please try again.
If an error repeatedly occurs during the rmware update process, please contact your
nearest Patlite Sales Representative.
Please
Do not disconnect the power cable or LAN cable during the update.
Possible cause of failure may occur.
Updating the rmware does not affect the current setup parameters, however, it
does affect the Event Log. Therefore, it is recommended to backup the “Event
Log” prior to updating the rmware.
①
②