Use and Care Manual

BEFORE STARTING ASSEMBLY
Remove all of the pieces from the 4 packages and spread them out on the ground.
Before installation, please check the type and quantity of parts first.
It is recommended to use a clean work surface to spread the parts out and for
pre-assembly steps. Review all instructions before you begin, continue to refer to
instructions during assembly.
Be sure to follow all steps thoroughly.
Please prepare these components in advance at the beginning of each stage.
REQUIRED TOOLS
CAUTION
Some parts have steel edges. Please be careful when handling components.
Always wear work gloves, eye protection and long sleeves when assembling
or performing any maintenance on your shed. Do not attempt assembly on days
with strong winds or low temperatures.
03
Requires two people and takes 2-3 hours for Installation.
Recommended to wear gloves to avoid scratches.
Please read the manual carefully before installation.
DO NOT RETURN YOUR UNIT
TO THE STORE
Contact us first
[e-mail]