Instructions / Assembly

- 10 -

NOTE:

When tightening the screws, tighten sequentially.

DO NOT tighten any screws fully and then move on to the next one.

This may cause the frame to warp.

If there is still wobbles or screw holes cannot be aligned,loosen the

screws and execute this same process.

If the Table is not stable it could lead to damage to the product.

Attach the Table Legs (B) to the Table Top (A) by securing with M6*40 Head

Cap Screws (R1) and Washers (Z). Do this in 4 places.

NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.