Instructions / Assembly

http://www.nuugarden.com http://www.nuugarden.com
D
E
F
P N M J
X4
H
P N
M
J
X4
D
E
F
ASSEMBLY INSTRUCTIONS
Note: DO NOT tighten any bolts until all bolts have been started;
Philips screw driver NOT included.
1. Attach the left side (D), right side (E),
and back(F)with 4 bolts 1/4 in x 15 mm (M),
4 flat washers(N)and 4 spring washers (P)
by using the Allenwrench (J)
as shown on the right.
2. Attach the gas cylinder holder (H)
to the left side (D) and right side (E)
with 4 bolts ¼ in x 15 mm(M),
4 flat washers (N) and 4 spring
washers (P) by using the Allen wrench (J).
G
P N M J
B
X4
G
D
F
P N M J
E
X4
3. Attach the door frame (G) to the left side (D) andright side (E)
with 4 bolts ¼ in x 15 mm (M), 4 flatwashers (N) and 4 spring
washers (P) by using theAllen wrench (J).
4. Turn over the assembled frame, attach to the top (B) with 4 bolts ¼
in x 15 mm (M), 4 flat washers(N)and 4 spring washers (P) by using the
Allen wrench (J), and keep the ignition panel directly facing the door (G).
5
6