Use and Care Manual

Contact us for assistance: [phone] | www.wtliving.com
7
aSSEMBLY
10
Turn the Table Top E face down on a soft surface.
Turn the Table Base D upside-down and align the
bolt-holes in the Tabletop Supports with the holes in
the bottom of the Table Top. Attach the Table Base
to the Table Top using 1 Bolt J and Washer K per
Tabletop Support. Tighten with Hex Wrench.
Turn the assembled table upright.
Hardware Used:
J Bolt (M6x20) x 4
K Washer (M6) x 4
11
Carefully place the Glass Table Top G on the
assembled table.
E
D
J
K
M
12
Enjoy your new Webster Sectional Set!