Use and Care Manual

Contact us for assistance: [phone] | www.wtliving.com 5
ASSEMBLY
5
On a soft, protected surface, turn one Curved
Seat
A
upside-down to install the Seat Support
Bar
C
using 2 Bolts

and 2 Washers  in each
end, as shown. Once all 4 Bolts are inserted,
tighten all hardware using the Hex Wrench.
Repeat the Seat Support Bar installation on the
other Curved Seat.
Carefully turn both Curved Seats back upright
and set side-by-side where you plan to use the
Sectional.
Hardware Used:
 Bolt (M6x20) x 8
 Washer (M6) x 8
6
Connect the 2 Curved Seats
A
together using 2
Connectors
L
as shown.
Hardware Used:  Connector x 2
7
A
C



Attach the 2 Arms B to the 2 Curved Seats
A
using 2 Connectors
L
per Arm as shown.
Hardware Used: L Connector x 4

L
B
B
Bench assembly is now complete.
Add the included seat cushions and back cushions.