Use and Care Manual

Contact us for assistance: [phone] | www.wtliving.com 4
aSSEMBLY
1
To assemble 1 Arm B: On a soft, protected
surface, place one Arm Rest
B2
upside-
down and align one Arm Side
B1
as shown.
Join the Arm Side to the Arm Rest using 4
Bolts
H
and 4 Washers K, as shown.
Repeat with another
Arm Side to complete
the frame of the Arm.
Hardware Used:
H Bolt (M6x35) x 8
K Washer (M6) x 8
2
Hardware Used:
3
Repeat with another Arm Side to complete
the frame of the Arm.
Hardware Used:
H Bolt (M6x35) x 8
K Washer (M6) x 8
H
K
H
K
J Bolt (M6x20) x 4
K Washer (M6) x 4
4
Assembly of the Arm is complete. Carefully
turn it back upright.
Repeat Steps 1—3 to assemble the second
Arm.
K
J
Once both Arm Sides are bolted to the Arm
Rest, join the corners using 4 Bolts J and 4
Washers K. Once all hardware is inserted,
tighten all Bolts using the Hex Wrench.