Use and Care Manual

Contact us for assistance: [phone] | www.wtliving.com 4
ASSEMBLY
1
2
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service at (866)-985-7877, Monday-Friday, 9 a.m. - 6 p.m. EST or email [e-mail].
Place all parts on a soft, level surface for
assembly. Estimated Assembly Time: 30 Minutes | DO NOT
over tighten hardware!
G H I
G H I J
E
D
F
C
Attach the Back Panel
A
to the Left arm
C
and Right arm
D
with 4 sets of Bolt
E
/Washer G/Spring Washer H/Nut I
in the order shown above. Do not fully tighten yet.
Attach the Seat Panel B to the Left Arm and Right Arm using 4 sets of Bolts F/Washers G/Spring Washers H/
Nuts I as shown. Securely tighten all hardware installed to this point WITHOUT OVERTIGHTENING.
Use the Plastic caps
J
to cover the Nuts on the back of the bench. (This is for cosmetic purposes only.)
Adjust the pre-installed Adjustable Feet
M
until the bench sits level on the ground.
E
F
3
4