Use and Care Manual

Contact us for assistance: [phone] | www.balkenehome.com
4
1
Attach the Arms
B
and C to the Seat
D
with 4 Bolts
E
and M6 Washers
G
as
shown. Tighten using the Hex Wrench H.
2
Attach the Arms
B
and C to the Seat Back
A
by
sliding the arms onto the pegs on the sides of the
Seat Back, then using a Bolt
E
with a Washer
G
to fasten each Arm as shown. Tighten using the
Hex Wrench H.
E
G
E
G
H
H
Hardware Used: E Bolts (6x20mm) x 4
G Washers (6mm) x 4
Hardware Used: E Bolts (6x20mm) x 2
G Washers (6mm) x 2
ASSEMBLY
PrEParaTion
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are
missing, please contact Customer Service at [phone], Monday-Friday, 9 a.m. - 6 p.m. EST or email
[e-mail].
Place all parts on a soft, level surface for assembly. Estimated Assembly
Time: 20 Minutes | DO NOT over tighten hardware!