Full Product Manual

Contact us for assistance: [phone] | www.wtliving.com 4
ASSEMBLY
1
Insert the lower tube into the base of the upper
tube. Secure the tubes together by pressing the
push button until it locks into the hole at the base of
the upper tube.
2
After connecting the tubes, secure the assembled
umbrella in a base. NOTE: There is not a base
included with this umbrella.
3
Open the umbrella using the crank. To open,
turn clockwise. You can tilt the umbrella using
the push button located near the top of the upper
tube. Be sure to stabilize the umbrella with one hand
ABOVE the button to prevent potential damage
caused by the umbrella falling.
Always be sure the tilt lever locks after adjusting.
There is one locking location in each tilt direction.
4
When not using your umbrella, return to
the untilted position. Turn the crank
counterclockwise to close the shade. NOTE: Do not
store your umbrella when the fabric is damp or wet
to prevent mildew.
5
To completely take down umbrella, press the
locking button where the upper and lower tubes
meet. While pressing, pull the tubes apart.
1
3
2