Installation Guide

      
ASSEMBLY
3

bottom of the sleeves of the Fabric Seat
E
.
Fabric Seat over the free
arms of the rocker seatbase, ensuring that the holes

Short Bolts
J
inserted through the bar eyelets into the frame, bolt
the frame brace to the frame.
Hardware Used:
4

back of the rocker. Align the eyelets on one
Arm
D

Medium Bolts
I
, secure the Arm to the

Hardware Used: 4x Medium Bolts
5
Use the Allen Wrench
L
to tighten the Long
Bolts
A

Nuts
D
Allen Wrench
L
to tighten the Short Bolts
C
securing each Frame
Brace Bar
G
to the frame. Use the Allen Wrench
L
to tighten the Medium Bolts
B
in each Arm
H
.
Test the frame for stability and tighten bolts further if

indoors or out!