Installation Guide

      
ASSEMBLY
1
Choose one of the Rocker Bases
A
and one “I”
Brace
G
I” Brace 
the drilled holes in the front leg of one Rocker Base.
Long Bolts
H
through the leg into the “I”
BraceNuts
K
, but do not

second “I” Brace Bar to the back leg. Complete the
Rocker Side onto the
“I” BracesLong Bolts and Nuts,
ensuring that both sides face the same direction.
Hardware Used:
8x Nuts
2
Back
Support
B
Back Support in the open
tubes of the assembled base, ensuring that the

holes punched in the sides and back of the fabric
sleeves of the Fabric Seatback
F

of the Fabric Seatback over the Back Supports you


Short Bolts
J
through the eyelets of the
Frame Brace Bar
C
into the back supports to secure
the frame brace to the seat back.
Hardware Used: