User's Manual

• Volume Mute - Mutes your system volume

Maintenance of your Wireless Desktop

• If the mouse does not move smoothly, you should clean the roller ball and the roller bars in the

mouse.

• Open the cover of the ball by turning it counter-clockwise, remove the ball and wipe it with a clean

cloth.

• There are three sets of roller bars. Remove the dust or any other miscellaneous matter by using a

cotton swab. You can dip the cotton swab in alcohol to help remove deposits if necessary.

• You may clean the surface of the Mouse and Keyboard with a soft damp cloth.

• Do not use any harsh or abrasive cleaners

• Before using any chemical cleaners, please test the results on the bottom of the device.

Installation Configuration and Troubleshooting

If your Wireless Desktop does not function properly, please review the following steps for

troubleshooting.

1. Insure that the PS/2 connectors of the wireless receiver are properly inserted into the mouse and

keyboard PS/2 sockets of your computer.

2. Re-orient the receiver closer to the mouse and keyboard.

3. Check the power level of the batteries.

4. Keep the distance between the receiver and the devices within one meter (1.2 meters max.)(3.5 feet).

Some objects may affect the operating distance or completely block the wireless signal.

5. Metallic surfaces will shorten transmission distances

6. Try changing to another channel. Please refer to “Switching Channels”