User's Manual

Wireless Rechargeable Mouse for Desktop

For best results, you should charge the mouse via the

supplied USB charge cable for at least 8 hours

before using it. See “Charging the Mouse” on page 5.

Installing the Batteries

1 Remove the battery cover from the bottom of the mouse

by pressing the tab located on the bottom and lifting it

off.

Bottom of mouse

2 2 AA NiMH rechargeable batteries are included. Insert

the supplied batteries, making sure that the positive (+)

and negative (-) ends of each battery match the polarity

indicators inside the battery housing.

WARNINGS: Use ONLY heavy-duty NiMH batteries.

Never use alkaline if you intend to use the recharging

feature.

Avoid mixing new and used batteries in a device.

3 Slide the battery cover back into position until it “clicks”

firmly into place.

The optical sensor, located on the bottom of the mouse,

glows red.

Tab

Battery cover

Optical

sensor