User's Manual

2. HOW TO SET UP SAFE BOX
2.1 . General functions
- Safe box operates with card or password.
- Systems cards for Safe box operation consist of Key Card, System Card, Guest Card
and starts with pressing "RESET" button on the safe box.
- Initial password is set as "1234" and new password is set with 4 digit.
- Set necessary operational functions on the Setup Card before operating Safe box.
- ‘SEr” displays when the operational functions are missing and system is in the failure
- “Err2” displays when the operation or hardware function fails.
2.2 . Set-Up
- Necessary operational functions are set in the Setup Card.
- Initial password is set as “1234”
- Warning sound beeps and “SEr” displays on the 7 segment when trying to use safe
box without complete setup settings.
- Safe box operates in the Free Mode, half-cycle mode..
- Password display is optional when locking (display as default)
- Password display is optional when unlocking (no display as default)
- Operation disabled by the minutes after 5 times wrong password entry (default 15
min)
- Lock the safe box by pressing “Relock” with same password previously entered
within the valid time set
* set RELOCK lapse time by the minute and as default ,
- Time setting.
- Vender ID corresponds to hotel ID and Customer ID corresponds to Room number.
- Register Owner, Master Card
- Register upto 5 Master Cards.
3. SAFE BOX FUNCTIONS
3.1 User’s Function
3.1.1 Lock
1) Enter password and press “LOCK”, when 7 Segment blinks 3 times.
Then confirmation melody of saved password sounds and displays ‘CLOS”
on the 7 segment. ,
2) Lock the safe box by entering password only, without pressing "RESET"..
3) More than 5 seconds entry time lapse cancels the password input.
4) Pressing “RESET” during password entry cancels the input and have to retry..