User's Guide

Version 1.0 - 7 -
the “Registration” button for a new registration.
To register via the Mobile App, follow the instructions that will appear on your
mobile device screen. The instructions are like following:
- Scan your user card on the lock.
- To enter registration mode, scan you user card again (the registration
mode’s on when the lock’s LED is blinking)
- Touch the “Register” button below.
Now, when registration is done, your mobile key is fully synchronised with the
user card and ready to operate the lock. It means that the information form the
user card corresponds with that of the mobile key, including the validity period.
Thus, the information about the valid date will automatically appear on the
mobile device screen. The registration is a one-time process, so you don’t need
to do it more than once for one locker.
To open the locker, press the “Touch to Open” button on your mobile device
monitor.
(4) Multi-user and multi-locker
There are four operation scenarios for BLE mobile access locking solution. An