User's Guide

Version 1.0 - 5 -
3. Lock Operation
3.1 Pin Code & RF tag uses
① PT400TWR can be set with three different credential acceptance modes.
② Pin Code & RF tag mode accepts both Pin Code and RF tag
③ RF tag only mode accepts only RF tag ( no Pin Code available )
④ Pin Code only mode accepts only Pin Code and does not read any RF tag.
⑤ These modes can be set from Maintenance card ( or setup card )
[Pin Code & RF tag] [RF tag only] [Pin Code only]
3.2 Assigned Mode
3.2.1 Open & Close by Pin Code
① Default Pin Code :1234
② Open： Touch Screen + “4 digit Pin Code”+
③ Close： Automatic close after several seconds
④ Change Pin Code：
Touch Screen + old Pin Code + + new Pin Code +
+ new Pin Code +
Pin Code can be changed only when the lock is under
unlocked situation.