User's Guide

Version 1.0 - 17 -
① Put Lock info Card to the lock.
② Various lock information data will be downloaded from locks to the Card. One
card can collect up to 120 locks.
③ Read the Card at LOS program, and all data will be saved to the PC.
④ Lock ID, operation mode, Battery status, time, auto opening setting status, RF
channel and more will be indicated.
For further information about all system cards and how to issue,
refer to LMS / LOS or Esmart ultra client manual.
5. Indication Instruction
1) All the Pin Code is 4 digit（0-9）.
2) “Start” button : wake up button，the keypad or RFID does not respond
before you press “Start” button.
3) Open/Close：GREEN LED on for 0.2 second, one beep sound for 0.2
second.
4) Successful programming：Melody.
5) Indicate for mistake：RED LED flashes 3 times, 3 beep sounds
6) Low voltage：RED LED blinks 5 times, and beep sounds 5 times.
7) Incorrect Pin Code or input is beyond 5 digits: see #5, power off，need
to press “Start” button to wake up the keypad.
8) When the input is incomplete, after 5 seconds, see #5，power off .
You need to press “Start” button again to wake up the keypad.