User's Manual

Version 1.0 - 7 -
3.3 Free Selection Mode
- Open & Close by Pass Code
① Close： “Start” button + self-selected 4 digit code + “Start” button
② Open： “Start” button + User’s 4 digit code + “Start” button.
Bolt stays open
- Open & Close by RF card key
“Start” Button + Put User card on the lock.
Note: After it is unlocked, any 4 digit password can be used to lock it.
User Pass Code will be deleted each time lock is opened.
3.4 Open in Emergency
① In case User forgets his(her) password or lost card, Operator can
open the lock by Master Card I or Master code.
② If Master code is set, “Start” button + Master code + “Start” button to
open any locks. Master card can be set by Set up Card.
③ Once Master card I is used to open the lock, the lock reverts to
default position
(i.e. lock will stay open for Free Selection, and default code of 1234
for Assigned mode.).
④ User Card ID will be erased from the lock if Master Card I has the
function to delete the User ID.
⑤ When the lock stops working due to low battery, lock can be opened
by external emergency battery pack.