User's Manual
Table Of Contents
- Table of Contents
- 1. Understanding HP-100 RFID lock
- 1.1 What is HP100 RFID Locks?
- 1.2 Card Type and Functions
- 2. Type of Lock Operation
- 2.1 Free Selection (Day Use)
- 3. Basic operation of the Lock
- 3.1 OWNER CARD
- 3.2 MASTER CARD
- 3.3 User Card
- 3.4 Low Battery warning and battery change
- 3.5 Audit Trail
- ANNEX A Beep & LED Table
- ANNEX B Trouble Shooting
clock of the lock returns to default time (2008. 01.01).
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
④ Please use the Time Setting card to set the time of the lock.
(For time setting, please refer to “How to use LOS (Locker Operation System)”
or LIS(Locker Installation System).
3.5 Audit Trail
① Put Audit Trail Card to the lock.
② The latest event data (up to 18 events) will be downloaded from lock to the
Card. Wait until melody is on.
③ Read the Card at LOS program, and 18 event data will be saved to the PC.
Version 1.2 - 9 - 2010-10-06