User's Manual
Table Of Contents
- Table of Contents
- 1. Understanding HP-100 RFID lock
- 1.1 What is HP100 RFID Locks?
- 1.2 Card Type and Functions
- 2. Type of Lock Operation
- 2.1 Free Selection (Day Use)
- 3. Basic operation of the Lock
- 3.1 OWNER CARD
- 3.2 MASTER CARD
- 3.3 User Card
- 3.4 Low Battery warning and battery change
- 3.5 Audit Trail
- ANNEX A Beep & LED Table
- ANNEX B Trouble Shooting
ANNEX A Beep & LED Table
Beep LED Description
1 x short beep 1 x Green(2sec) OK
3 x short beep 3 x Red(2sec) flashes Operation Error
3 x short beep 1 x Red & Green in turn(2sec) Time over
Do-Re-Mi Melody 1 x Red & Green in turn(2sec)
Successful Set up / mode
change / Time setting
5 x short beep 5 x Red & Green Low battery
Do-Re-Mi Melody 2 x Red & Green Succ
essful connection
between
front and back
bodies.
1 x short beep 1 x Green Off the Alarm by Master card
Melody 1 x Green (1.5 sec)
Successful registration of
Owner Card/ Master Card
Melody 1xGreen
Read Clear Card and delete
the information of O/M/U in
the memory of the lock.
Green and Red on/off
1) Owner Card is not
registered.
2) In case of Shift or Week-
day operation mode, Alarm
for shift or Time due.
Red on/off Owner card is registered, but
Master card is not registered.
Green on/off Owner
& Master card are
registered, but User card is
not registered in Fixed Mode.
short beep : 0.3sec long beep : 1.5sec
Version 1.2 - 10 - 2010-10-06