User Guide

Version 1.0 - 5 -
1.3 Operation cards
Card Name
Description
Card
type
Key
card
• Security Key value to be loaded to locks at scanning.
• Then, the locks will accept only the RFID cards which have the
same security key value.
Mifare
1KB
Setup
card
• Lock will be programmed with various options at scanning.
• Setup card can be set from PTHMS Client Pro Software
Staff
card
• For staffs access card
• Set name/title/authority/holiday, etc.
Emergency
card
• All rooms can be opened with an emergency card.
Particular attention should be paid to loss
Blocking
card
• A Blocking card is used to block all user groups on a particular door.
For example, this card is used to block all groups except Maid by
reading the blocking card when Maid cleans the Fitness Club.
Clearance
card
• A card that cancels the registered Guest Card. This card can only
be used after the Employee (Maid) Card has been read.
Passage
Mode
card
• A card to unlock the door until the specified time for the defined
door.
Privacy
card
• It is operated by the Toggle concept in order to display “D.N.D” on
the door with the card provided in each room.
It can be operated only when Guest Card is registered.
In order to delete it, Maid must read Maid Card/Employee Card and
then Erase Card/Power-Down Card to cancel it, or it will be
automatically cancelled when a new guest card is registered.
Audit trail
card
• A card for collecting usage histories for each lock. (Up to 2000
cases)
Combi
card
(Mifare
+
Kona
COS)
Lock info
card
• A card to read the setting value of each door.