User Guide

FX200 User Guide
Version: 1.0 4
http://www.esmartlock.com
1. Understanding FX200 FURNITURE LOCK
1.1 What is FX200 FURNITURE LOCK?
- FX200 locker locks are the locker lock operated by either 13,56 MHz RF Card Key.
- FX200 can work as both offline (standalone) or online mode.
- To set FX200 as online system, additional peripherals such as Access point, Server and
client software are necessary.
Refer Esmart Ultra client user manual for online lock system setup.
1.2 Operating cards
Card Name
Description
Card
type
Key
card
• Security Key value to be loaded to locks at scanning.
• Then, the locks will accept only the RFID cards which have the same security
key value.
Mifare
1KB
Setup
card
• Lock will be programmed with various options at scanning.
• Setup card can be set from Lock Installation Software (LIS).
Master I
card
• All locks will be open at scanning.
• User card registration in the lock will be deleted and the lock will be ready to
accept new user card.
Master II
card
• Locks will be open or close without User card registration deletion.
• Useful when user needs to open lock temporarily.
Owner
card
• Master cards registration to be deleted at scanning this card on locks.
• After Owner card scanning on lock, scan new master cards to register to the
lock.
Maintenance
card
• Lock to be programmed with various options at scanning as you set.
• Time, Master cards registration, Master code, etc can be updated without
changing lock ID.
Audit trail
card
• Latest 150 event history to be collected at scanning.
• Card number, event type (open & close), time of event, user name, etc to be
collected.
Mifare
4KB
Lock info
card
• Various information of lock can be collected into this card.
• One Lock info card can collect information from up to 40 locks.
• Lock ID, Operation mode, Power status, software version, time, auto opening
and more to be collected.
*****This furniture lock system is using in Hotel, Office and any place which is without residential area.