User Guide

AP300 (ACCESS POINT) User Manual
Version: 1.0 9
http://www.esmartlock.com
⑦ Input values in ‘AP Setting’ referring to the description below.
Item
Description
AP Name
AP name that will be inputted into AP Account in Client program
Assign AP ID on your own, but do not duplicate
Only English alphabet and number are available
(Any space or special characters cannot be contained)
RF Channel
RF Channels you would like to connect (11~25)
BUILD
Building number (1~50)
FLOOR
Floor number (1~99)
ROOMS
Room numbers (1~999)
⑧ Click ‘WRITE’ button to save the information of the selected AP, and check the message
‘Configuration writing OK’ from message box.
⑨ Click ‘READ’ button again to check if the setting values are properly saved.
⑩ If you want to set another AP, follow the steps from ②.
⑪ After setting is completed, click ‘EXIT’ to close the window.
⑫ Click ‘New’ button from AP account window to enter new information.
⑬ Input the following items and click ‘Save’ button to save the entered information.