PASS & SEYMOUR® PLUG LOAD CONTROL SOLUTIONS MAKE ENERGY MANAGEMENT AUTOMATIC DEVICES THAT
CONTROL THAT’S CONVENIENT, CONNECTED AND CODE-COMPLIANT. New requirements for reducing energy consumption in commercial buildings are here. Standards such as CA Title 24 - 2013 and ASHRAE 90.1 - 2010, 2013 now require that at least 50 percent of all receptacles in designated spaces of a building be “controllable”— automatically turning themselves off and on as needed. Legrand is making it easy for installers to stay code-compliant with a full line of Plug Load controllable solutions.
DESIGNED WITH SIMPLICITY IN MIND Whether you’re upgrading an existing layout or configuring an entirely new system, P&S® Plug Load Controllable Devices help keep it simple. From code-required permanent markings that make them easy for end users to identify, to the ability to wirelessly control them via traditional occupancy sensors, these devices take installation, convenience and simplicity to a new level.
RF RECEPTACLE AND SIGNAL PACK Now you can control receptacles and lights with one seamless solution. The RF receptacle’s built-in relay switch communicates with the signal pack, turning itself on and off according to the sensor’s command. And because one signal pack can control multiple receptacles, it’s a cost-effective and easy way to save energy and money.
P&S Plug Load Controllable Devices ® PART NO. DESCRIPTION RATINGS A. V. 15 125 20 125 15 125 20 125 COLORS NEMA Config.
P&S Plug Load Controllable Devices — PlugTail ® PART NO. ® DESCRIPTION RATINGS A. COLORS V. NEMA Config.
