Environmental Declaration
PEP ecopassport No LGRP-00811-V01.01-EN Page 4 / 6
Legrand North and Central America
Pass & Seymour
50 Boyd Ave
Syracuse, NY 13209
1.877.BY.LEGRAND (295.3472)
www.legrand.us
Product Environmental Profile
Pass & Seymour: Turnlok® Locking
Connectors - 20/30A
Manufacturing Packaging taken into account. As required by the PEP ecopassport program, all transport for the manufacturing of the
Reference Product, including materials and components, has been taken into account. The waste generated during
manufacturing phase has been taken into account.
Distribution Transport between the last distribution center and an average delivery to the sales area.
Installation The end of life of the packaging (19.5 g) is taken into account at this phase. Transport of packaging to end of life
treatment.
Use • Under normal conditions of use, this type of product requires no servicing or maintenance.
• No consumables are necessary to use this type of product.
• Product category: power socket
• Use scenario: for a 20 year working life, the product operates at 50% of the rated load for 50% of the time. This
modelling duration does not constitute a minimum durability requirement.
• Energy model: Electricity(US) - 2009
End of life The default end of life scenario modelled maximizes the environmental impact using the PCR hypothesis for “Local
transport”: 621 miles (1000 km) by heavy truck and landfilling.
Software used EIME V5 and its database “CODDE-2016-11” and the indicators defined in the PCR ed 3 in alignment with the EN15804
standard
ENVIRONMENTAL IMPACTS
The evaluation of environmental impacts examines the stages of the Reference Product life cycle: manufacturing, distribution,
installation, use, and end of life. It is representative of products marketed and used in North America.
The following modelling elements were taken into account:
Total for Life cycle
Raw material
and
manufacturing Distribution Installation Use End of life
Global warming (GW) 6.26E+01 kg CO
2
eq. 1.19E+00 2% 1.19E-02 < 1% 2.30E-03 < 1% 6.14E+01 98% 1.61E-02 < 1%
Ozone depletion (OD) 1.20E-06 kg CFC-11 eq. 8.77E-08 7% 2.41E-11 < 1% 1.40E-11 < 1% 1.11E-06 93% 3.40E-10 < 1%
Acidification of soil
and water (A)
6.13E-02 kg SO
2
eq. 2.39E-03 4% 5.35E-05 < 1% 1.11E-05 < 1% 5.88E-02 96% 6.28E-05 < 1%
Water eutrophication
(WE)
1.68E-02 kg PO
4
3-
eq. 1.19E-03 7% 1.23E-05 < 1% 1.05E-05 < 1% 1.55E-02 92% 7.99E-05 < 1%
Photochemical ozone
creation (POCP)
9.67E-03 kg C
2
H
4
eq. 2.39E-04 2% 3.80E-06 < 1% 7.86E-07 < 1% 9.42E-03 97% 4.85E-06 < 1%
Depletion of abiotic
resources - elements
(ADPe)
5.03E-05 kg Sb eq. 4.97E-05 99% 4.76E-10 < 1% 9.90E-11 < 1% 6.04E-07 1% 9.53E-10 < 1%
Total use of primary
energy (PE)
8.39E+02 MJ 1.15E+01 1% 1.68E-01 < 1% 3.18E-02 < 1% 8.27E+02 99% 1.81E-01 < 1%
Net use of fresh
water (FW)
1.18E-01 m
3
9.09E-03 8% 1.07E-06 < 1% 6.36E-07 < 1% 1.09E-01 92% 1.18E-05 < 1%
Depletion of abiotic
resources – fossil
fuels (ADPf)
9.80E+02 MJ 7.98E+00 < 1% 1.67E-01 < 1% 3.21E-02 < 1% 9.72E+02 99% 2.25E-01 < 1%
Water pollution (WP) 3.60E+03 m
3
5.70E+02 16% 1.96E+00 < 1% 3.60E-01 < 1% 3.03E+03 84% 1.93E+00 < 1%
Air pollution (AP) 5.50E+03 m
3
2.78E+02 5% 4.88E-01 < 1% 2.57E-01 < 1% 5.22E+03 95% 1.68E+00 < 1%
The values of the 27 impacts defined in the PCR-ed3-EN-2015 04 02 are available in the digital database of pep-ecopassport.org website.
The environmental impacts of the Reference Product are representative of the products covered by the PEP, which therefore constitute a
homogeneous environmental family.