Environmental Declaration

PEP ecopassport No LGRP-00811-V01.01-EN Page 3 / 6
Legrand North and Central America
Pass & Seymour
50 Boyd Ave
Syracuse, NY 13209
1.877.BY.LEGRAND (295.3472)
www.legrand.us
Product Environmental Profile
Pass & Seymour: Turnlok® Locking
Connectors - 20/30A
DISTRIBUTION
Products are distributed from logistics centers located to optimize transport efficiency using EPA SmartWay
®
certified carriers
to reduce greenhouse gases emissions. Due to highly variable distribution, an average of 1200 km by heavy truck was used. This
represents transportation of the Reference Product from our warehouse to the local point of distribution in the North American market.
MANUFACTURING
The Reference Product comes from a site that have received ISO 14001 certification.
USE
Servicing and maintenance:
Under normal conditions of use, this type of product requires no servicing or maintenance.
Consumable:
No consumables are necessary to use this type of product.
Energy:
Electric energy is lost due to the Joule effect during the use of the product. Using the method described in PSR-005-ed2-2016 03 29 for
power sockets, the total loss over the life of the product is estimated to be 89 kWh. This loss constitutes the entirety of the product’s
energy use as the electric power passing through the product to supply the load is not attributed to the product.
END OF LIFE
• Hazardous waste
*
contained in the product: no hazardous waste
(
*
) Hazardous waste as defined by European Commission decision 2000/532/EC.
• Recycling rate:
Calculated using the method described in the IEC/TR 62635 technical report, the recyclability rate of the Reference Product (including
packaging) is estimated as 96%. This value is based on data collected from a technological channel using industrial procedures. It does
not pre-validate the effective use of this channel for end-of-life electrical and electronic products.
Separated into: (% mass of Reference Product)
- plastic materials (excluding packaging): 48%
- metal materials (excluding packaging): 29%
- packaging (all types of materials): 19%
INSTALLATION
For the installation of the product, only standard tools are needed and no electricity is required.