Submittal Sheet

SF105R3 — April 2018 — For latest specs visit www.legrand.us/passandseymour
2
PASS & SEYMOUR
®
Commercial Grade Switches
15 & 20A, 120/277VAC
Technical Information
2.375"
3.281"
Warranty
1 Year
Performance
Electrical
Dielectric Withstand Voltage 1500V Minimum
Maximum Working Voltage 277VAC
Overload Minimum 4.8 times rated current for 100 cycles
Temperature Rise 30°C maximum at rated current
Maximum Continuous Current 277VAC
Endurance 50,000 cycles minimum, resistive, inductive,
tungsten lament lamp load (Fed Spec)
Mechanical
Terminal Accommodations
#14 AWG – #10 AWG
Environmental
Flammability
UL94 V2
Operating Temperature
Maximum continuous +115°C, minimum -40°C
Materials
Back Body Glass-Reinforced Nylon
Front Body Nylon
Toggle Thermoplastic Polycarbonate
Terminals Brass
Terminal Screws Tri-Drive Brass-Plated Steel
Strap Plated Steel
Contacts Silver Cadmium Oxide
Spring Arm Brass
Bumper Rubber
Spring Zinc-Plated Steel
Ground Terminal Brass
Ground Screw Tri-Drive Zinc-Plated Steel
Dimensions for
15 & 20 Amp
1.320"
1.073"
HP Conversion Table – Switches
15 Amp 1/2 Horsepower at 120VAC; 2 Horsepower at 240VAC
20 Amp 1 Horsepower at 120VAC; 2 Horsepower at 240VAC
15 Amp Cover Blue
20 Amp Cover Red
2.196"