Environmental Product Declaration

PEP ecopassport n° LGRP-2013-152-V1-EN Page 3 / 4
Product Environmental Profile
PASS & SEYMOUR®
TradeMaster® Duplex Grounding Receptacle
Pass & Seymour
50 Boyd Avenue
Syracuse, NY 13221
1.877.BY.LEGRAND (295.2472)
www.legrand.us
END OF LIFE
• Hazardous waste contained in the product:
No hazardous waste comes from this Reference Product.
• Recyclability rate:
Calculated using the method described in the IEC/TR 62635 technical report, the recyclability rate of the product is estimated as 97.9 %.
This value is based on data collected from a technological channel using industrial procedures. It does not pre-validate the effective use
of this channel for end-of-life electrical and electronic products.
Separated into (in % mass of the Reference Product):
- Plastic materials (excluding packaging) : 40%
- Metal materials (excluding packaging) : 49%
- Packaging (all types of materials) : 8%
Manufacture
Unit packaging taken into account. As required by the «PEP ecopassport» programme all transports for the
manufacturing of the Reference Product, including materials and components, has been taken in account.
Distribution
Transport between the last Group distribution centre and an average delivery to the sales area.
Installation
Installation components not delivered with the product are not taken into account.
Use
• Under normal conditions of use, this type of product requires no servicing or maintenance.
• No consumables are necessary to use this type of product.
• Product category: passive product.
• Use scenario: non continuous operation for 20 years at 30% of rated load, 30% of the time. This modelling duration
does not consitute a minimum durability requirement.
• Energy model: US - 2009
End of life
In view of the data available on the date of creation of the document, and in accordance with the requirements of the
PCR of the «PEP ecopassport» programme, transport of the reference productby road only once, over a distance of
1000 km, to a processing site at the end of life was counted.
Software used
EIME V5 and its database «Legrand-2012-10-31 version 3» made from database «CODDE-2012-07»
ENVIRONMENTAL IMPACTS
The evaluation of environmental impacts examines the stages of the Reference Product life cycle: manufacturing, distribution,
installation, use and end-of-life. It is representative from products marketed and used in the United States of America.
The following modelling elements were taken in account: