Operators Manual

Introduction
Paslode Cordless Finish Nailer
Operating Manual
This manual is intended to acquaint you with the Paslode
Cordless Finish nailer. Unlike other power fastening tools,
the Cordless Finish nailer is powered by an internal
combustion linear motor. In simpler terms, your Cordless
Finish nailer is powered by a motor similar to the one that
powers an automobile. The Cordless Finish nailer ignites a
fuel and air mixture to produce the energy to drive the motor,
which in turn drives the fastener. As you will see, the
Cordless Finish nailer is totally self-contained. It carries its
own fuel supply and battery, along with a supply of fasteners.
For ease of use, this manual is divided into sections (see
Contents). Each section of the manual is written with you,
the tool operator, in mind. We have left out all of the technical
terms so that you can readily understand how to get the
maximum performance from your Cordless Finish nailer,
and how to avoid damaging the tool or injuring yourself. But,
to accomplish this, we need you to do two things:
1. READ THE MANUAL FROM COVER TO COVER
BEFORE USING THE TOOL.
2. FOLLOW ALL INSTRUCTIONS IN THE MANUAL.
The Cordless Finish nailer should be handled like other
power fastening tools that you use. Like most tools, when
used improperly it could result in injury. If you are going to
allow others to use the Cordless Finish nailer, it is your
responsibility to make sure that they also read and comply
with the instructions in this manual before attempting to
operate the tool.