Use and Care Manual

Fasteners and Applications

NOITACILPPAEPYTEZIS

,gnihtaehs llaw ,tnemyalrednUknahS gniR nommoC) (50 x 2.87 mm)D6( 311. x "2

roof and floor decking, siding

gnidis ,gnicneF,knahs gnir nommoC) (50 x 2.87 mm)D6( 311. x "2

HD Galv, GalvGuard™

,tnemyalrednu ,gnikced roolf & fooRknahs gnir relooC) (60 x 2.87 mm)D8( 311. x "8/3-2

sheathing

gnicnef ,gnidis ,gnikced lanoitaerceR,knahs gnir detaoC) (70 x 2.87 mm))D8( 311. x "4/3-2

gniledomeRlian detaoC) (76 x 3.05 mm)D01( 021. x "3

,gnidis ,gnikced lanoitaercer ,gnicneF k,nahs gniR) (76 x 3.05 mm)D01( 021. x "3

sfoor elit

gnimarFlian detaoC) (75 x 3.33 mm)D01( 131. x "3

3-1/2" x .131 (90 x 3.33 mm)

gnimarF

Framing / Fencing

Landscaping

lian detaoC

Bright

HD Galv

) (82 x 3.33 mm)D21( 131. x "4/1-3

Smooth Shank - For general construction, carpentry and

framing: the most popular and versatile.

Ring Shank - The ring shank provides improved withdrawal

resistance for applications where the resistance from smooth

shank fasteners is not adequate: floor decking, crating,

pallets.

Hardened

Note: For Australia and New Zealand, nail sizes, coating types and applications

may vary. Please check your local building code regulations.

Steel - For attaching wooden plates to green

concrete foundations; 2X furring strips to cinder block.

GalvGuard™- These nails are hot dipped galvanized with

a baked on polymer coating. They offer the highest cor-

rosion resistance of any galvanized nail. These nails

should be used where higher corrosion resistance is required

to retard rust and rust staining. Recommended for use in

natural wood siding, such as cedar, redwood, cypress and

preservative treated lumber. (Not for use in all-weather

wood foundations.)

The Paslode Cordless Framing Nailer is not recommended for use with 3" (75mm)

and longer Ring Shank nails in pressure treated lumber