Service and Repairs

DANGER

Never operate the Paslode Cordless Framing nailer unless all

four Socket Head Cap Screws are firmly tightened on the

cylinder head. Failure to do this could result in tool damage,

fire and personal injury.

Handle-Magazine Removal

DANGER

Remove all fasteners, fuel, and battery prior to servicing tool.

Step 1

Using the 5/32" Hex Key Wrench (# 401331) remove

the Handle-Magazine Assembly by removing the two

#10-24 x 1-1/8" long Socket Head Cap screws from the

nose piece of the tool and pivot the Handle-Magazine

Assembly away from the Motor

Assembly

Step 2

Remove the grille and air filter. Clean them in soapy

water or with Paslode Cordless Tool Cleaner/Degreaser.

Step 3

Remove the cap and air filter by unscrewing the four

#10-24 Socket Head Cap Screws.

Screws

Grille

Filter