Use and Care Manual

3
TOOL SPECIFICATIONS
MODEL NO. tG100SCN (Part# 515400)
HEIGHT
11.5”
WIDTH
LENGTH 12.25"
WEIGHT 4.9 lbs.
OPERATING PRESSURE 80 to 120 psi (5.5 to 8.3 bar)
FASTENER SPECIFICATIONS
TOOL AIR FITTINGS:
This tool uses a 3/8” N.P.T. male plug. The fitting must be capable of discharging
tool air pressure when disconnected from the air supply.
OPERATING AIR PRESSURE:
80 to120 psi (5.5 to 8.3 bar). Select the operating air pressure within this range
for best tool performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
NAIL LENGTH
1.125”
SHANK DIAMETER .117 Shank
TOOL AND FASTENER SPECIFICATIONS
NAIL COATINGS
Galvanized Steel, tetraGRIP™
MAGAZINE TYPE
0 Degree, Plastic Coil
6”