SDS

Product: Paslode® Batteries - 404717 & 402500
Page 3 of 9
SECTION 6 – ACCIDENTAL RELEASE MEASURES
Internal cell materials, such as electrolyte leaked from battery cell, are carefully
dealt with according to the following:
Personal Precautions:
Forbid unauthorized person to enter. Remove leaked materials with
protective equipment written in Section 8.
Environmental Precautions:
Do not throw out into the environment.
Method of Recovery and Neutralization:
Dilute the leaked electrolyte with water and neutralize with diluted
sulfuric acid. The leaked solid is moved to a container. The leaked
place is fully flushed with water.
SECTION 7 – HANDLING AND STORAGE
Handling:
Technical Measures:
Prevention of user exposure: Not necessary under normal use.
Prevention of fire and explosion: Not necessary under normal use.
Precaution for Safe Handling:
Do not damage or remove the external tube.
Specific Safe Handling Advice:
Never throw out cells in a fire or expose to high temperatures.
Do not soak cells in water and seawater.
Do not expose to strong oxidizers.
Do not give a strong mechanical shock or throw down.
Never disassemble, modify or deform.
Do not connect the positive terminal to the negative terminal with
electrically conductive material. In the case of charging, use only
dedicated charger or charge according to the conditions specified by
Paslode.
Storage:
Technical Measures:
Storage conditions (suitable to be avoided):
Avoid direct sunlight, high temperature, high humidity.
Store in cool place (temperature: -30~35 degree C, Humidity: 45~85%)
Incompatible Products:
Conductive materials, water, seawater, strong oxidizers and strong acids.
Packing Material (recommended, not suitable):
Insulative and tear-proof materials are recommended.
SECTION 8 – EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures:
No engineering measure is necessary during normal use. In case of internal
cell materials’ leakage, the information below will be useful.
Control Parameters:
Common Chemical Name
Generic Name
ACGIH(2007)
TLV-TWA
BEI
Nickel,
Nickel Compounds
(As Ni)
Metal: 1.5mg/m³
Soluble Compounds: 0.1mg/m³
-